PROFIX NITRO-COMP Nitro Comp V2 Oil-less Air Compressor

*Please note that this product is not eligible for gift wrapping.

A new option from "NITRO-COMP"

Introducing the "Stationary Oil-Free Air Compressor V2" with a 3L tank.

Powerful and compact

And we have received support from many people for our cost performance,

The NITRO-COMP V1 is now used by so many people that it can be said to be the new standard for hobby compressors.

The new model, the NITRO-COMP V1, is equipped with a 3L tank.

[NITRO-COMP V2] is finally released.

With a 3L tank,

① The number of times the auto switch is operated is drastically reduced

②Drain separation, prevention of water blowout

3) Preventing pulsation

In addition to the benefits of

Because it is an integrated type, there is little air loss.

This allows you to paint with more stable power.

[Specifications]

Drive system	Oil-free piston
Autonomous driving	Starts at approximately 3 bar (0.3 MPa) Stops at approximately 4 bar (0.4 MPa)
Safety Valve	Operates at approximately 6 bar
Maximum continuous use time	20-60 minutes *1
Maximum pressure	Approximately 0.4 MPa
Rated Pressure	Approximately 0.2MPa~0.25MPa *2
Discharge air volume	20-25L/min
Operating volume	47db
Air tank	Yes (3L)
Power consumption	106w at maximum load, no-load power 63.6w
others	Automatic pressure switch, safety temperature sensor (125℃)
Weight	7.7kg
Body size	Height 37cm Width 14.5cm Depth 31.5cm

*1
This is an estimate of the continuous operating time.
The continuous use time varies depending on the environment, such as room temperature, humidity, and handpiece diameter (load).

*2
This will vary depending on the diameter of the handpiece used.
As a guideline, when using a 0.3mm diameter, the pressure will be approximately 0.2MPa to 0.25MPa.

accessories:

① Compressor body

② Flexible braided air hose 180cm 1/8 inch thread

③ Spiral air hose 40-120cm 1/8 inch screw

④ Air valve joint 1/8 (S) male to M7x0.5 male

*The 3-piece set includes the handpiece TH-C01.

Q. I can't adjust the air pressure. What should I do?

A. You may need to use a little force when adjusting the air pressure dial.

Please try the following steps:

1. Turn the dial counterclockwise until it stops. It's okay to turn it as far as you can.
2. 2. Turn the dial all the way to ensure the meter reaches zero. This will adjust the air pressure, so try again.