*If your order includes pre-order items, your order will be shipped once all items are available. If you are in a hurry, please purchase them separately.
*Please note that this product is not eligible for gift wrapping.
"You can keep using it forever"
The next-generation standard airbrush brand
A new option from "NITRO-COMP"
Introducing the "Stationary Oil-Free Air Compressor V2" with a 3L tank.
Powerful and compact
And we have received support from many people for our cost performance,
The NITRO-COMP V1 is now used by so many people that it can be said to be the new standard for hobby compressors.
The new model [NITRO-COMP V1] is equipped with a 3L tank.
[NITRO-COMP V2] is finally released.
With a 3L tank,
① The number of times the auto switch is operated is greatly reduced
2. Drain separation, water blowout prevention
3) Preventing pulsation
In addition to the benefits,
Since it is an integrated type, there is little air loss.
This allows you to paint with more stable power.
[Specifications]
Drive system
Oil-free piston
Autonomous Driving
Starts at approximately 3 bar (0.3 Mpa)
Stops at approximately 4 bar (0.4 Mpa)
Safety Valve
Operates at approximately 6 bar
Maximum continuous use time
20-60 minutes *1
Maximum pressure
Approx. 0.4MPa
Rated Pressure
Approximately 0.2MPa~0.25MPa *2
Discharge Air Volume
20-25L/min
Operating volume
47db
Air tank
Yes (3L)
Power consumption
106w at maximum load, no-load power 63.6w
others
Automatic pressure switch, safety temperature sensor (125℃)
Weight
7.7kg
Product size
Height 37cm Width 14.5cm Depth 31.5cm
*1 This is an estimate of the continuous operating time. The continuous use time varies depending on the environment, such as room temperature, humidity, and handpiece diameter (load).
*2 This varies depending on the caliber of the handpiece used. As a guideline, when using a 0.3mm aperture, the pressure will be approximately 0.2MPa to 0.25MPa.
accessories:
① Compressor body
② Flexible braided air hose 180cm 1/8 inch thread
③ Spiral air hose 40-120cm 1/8 inch screw
④ Air valve joint 1/8 (S) male to M7x0.5 male
*The 3-piece set includes the handpiece TH-C01.
Q. I can't adjust the air pressure. What should I do?
A. You may need to use a little force when adjusting the air pressure dial.
Try these steps:
Turn the dial counterclockwise until it stops. It's okay to turn it as much as you want, even if you wonder if it's OK to turn it that much.
2. Turn the dial all the way to ensure the meter reaches 0. This will adjust the air pressure and you can try again.