Recommended for WPL JAPAN RC Light Control Module (2 systems, 4 lighting patterns, remote control function included)

<About light control>
This module has two outputs for lighting LEDs.
Compatible with 5 to 6V receiver BEC power supply. If it does not work properly, please check the following.

• Is the LED designed to light up normally with a 6V power supply (is an appropriate resistor installed)?
  *It is best to first check whether the light turns on directly using the BEC power source without going through this module.
  
  
• Regarding operation, if it is assumed that a standard servo is connected, the system will detect and control the left and right command signals within a short period of time.

To use an example of steering, it responds when you turn quickly from right to left.
For example, if you take a turbo racing transmitter, for 3CH you would quickly click the button twice in a row. For 4CH you would quickly move the slide switch left and right. If you do these operations, the light pattern will change accordingly.