[Wholesale World] LED Lights & Light Stand Kits for RC Cars (Type 5)

It is made by a third party.

[Note]
This part is for advanced users.
General purpose LED light parts for 1/10 to 1/12 scale RC cars.

Bend the included etching parts and assemble them using screws.
When attaching the bracket with the included screws, you will need to drill 1.5mm holes as shown in the reference photo.

Clear parts in particular are prone to coming off, so please glue them appropriately.
To install it on your vehicle, you will need to do your own processing, work, and additional screws.

It cannot be used in combination with the receiver/ESC that comes standard with the WPL JAPAN RTR model.
Please prepare a compatible RC car model general-purpose ESC and receiver separately.
The LED mounting hole on this model is wide (approximately 5.5 mm in diameter) and is too loose to press in a 5 mm LED, so glueing or other methods are required to secure it in place.
Please be aware of this.

【specification】

Compatible power supply voltage: 5V-7.4V

High brightness white LED

Wiring length: Approx. 60cm

* Compatible with BEC connectors on general RC car receivers.

Buyer comments

Small general-purpose lights like this are very rare, and are a perfect size for 1/10 scale cars, as well as 1/16 scale cars such as the C14 and C24 series. This is a general-purpose LED light kit for 1/10 to 1/16 scale RC cars, and although you will need to drill holes and adjust the length of the wiring yourself, we highly recommend it!

[Video now available]

C34

C24