[Wholesale World] LED Lights & Light Stand Kits for RC Cars (Type 3)

It is made by a third party.

[Note]
This part is for advanced users.
General purpose LED light parts for 1/10 to 1/12 scale RC cars.

Bend the included etching parts and assemble them using screws.
When attaching the bracket with the included screws, you will need to drill 1.5mm holes as shown in the reference photo.

Clear parts in particular are prone to coming off, so please glue them appropriately.

To install it on your vehicle, you will need to do your own processing, work, and additional screws.
It cannot be used in combination with the receiver/ESC that comes standard with the WPL JAPAN RTR model.
Please prepare a compatible RC car model general-purpose ESC and receiver separately.

The LED mounting hole on this model is wide (approximately 5.5 mm in diameter) and is too loose to press in a 5 mm LED, so glueing or other methods are required to secure it in place.
Please be aware of this.

【specification】

Compatible power supply voltage: 5V-7.4V

High brightness white LED

Wiring length: Approx. 60cm

* Compatible with BEC connectors on general RC car receivers.

Buyer comments

This is a universal LED light kit for 1/10 to 1/12 scale RC cars, but it is relatively small so it can be used with the WPL JAPAN C14 and C24 without any problems. You will need to drill holes yourself and, in some cases, adjust the length of the wiring. Of course, the size is perfect for the WPL JAPAN C34.

[Video now available]

C34

C24