[Wholesale World] LED Lights & Light Stand Kits for RC Cars (Type 1)

It is made by a third party.

[Note]
This part is for advanced users.
General purpose LED light parts for 1/10 to 1/12 scale RC cars.

Bend the included etching parts and assemble them using screws.
To install it on your vehicle, you will need to do your own processing, work, and additional screws.
It cannot be used in combination with the receiver/ESC that comes standard with the WPL JAPAN RTR model.
Please prepare a compatible RC car model general-purpose ESC and receiver separately. Please note that this model is not suitable for use with the lights turned on because it is modeled after the light cover is attached as shown in the image.

The LED mounting hole on this model is wide (approximately 5.5 mm in diameter) and is too loose to press in a 5 mm LED, so glueing or other methods are required to secure it in place.
Please be aware of this.

【specification】

Compatible power supply voltage: 5V-7.4V

High brightness white LED

Wiring length: Approx. 60cm

* Compatible with BEC connectors on general RC car receivers.

Bend the included etching parts and assemble them using screws.

Buyer comments

This is a general-purpose LED light kit for 1/10 to 1/12 scale RC cars. You will need to drill holes and possibly adjust the length of the wiring yourself, but the size is perfect as an additional light for the WPL JAPAN C34. As shown in the reference image, please note that it is quite large for use with the C14 and C24 series.

[Video now available]

C34

C24